Factory profile · Public sources reviewed

Ningbo Zonbo Electrical

宁波中博电器有限公司 · Ningbo, Zhejiang · Founded 2010 · Not listed

Zonbo claims 12,000 m² of PCB fabrication a month, yet its registered scope covers appliances and auto parts and every catalogue item is an assembled board.

A small Yuyao control-board assembler: 150 staff, 11 engineers, automotive body boards, 80 million placements a month. Buy it as EMS, not as a board shop. Its 12,000 m²/month fabrication claim has no equipment list, and the registry scope never mentions PCB manufacture.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 宁波中博电器有限公司
Registered name (English) Ningbo Zonbo Electrical Co., Ltd.
Founded 2010
Listed Not listed
Headquarters Ningbo, Zhejiang
Production sites Yuyao (Fengming Road)
Unified social credit code 91330281554524260F
Official website http://www.zonbo.net/
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Ningbo Zonbo Electrical and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Ningbo Zonbo Electrical 宁波中博电器有限公司 Founded 2010 · Not listed Yuyao Fengming Road Source: disclosures cited on this page
Entity and footprint map. Ningbo Zonbo Electrical and the production sites named in the disclosures cited above.

The catalogue is the tell

Open the product catalogue and every item is a finished control board: headlamp levelling, rear-view mirror adjustment, central control switch, four-wheel-drive switch, windscreen wiper PCBA. Not one item is described as bare laminate. Not one carries a layer count, a base material, a finish or a panel size.

That is what an electronics manufacturing service looks like when it writes about itself. A board shop leads with capability — layers, line width, copper, impedance, materials. An assembler leads with the box the customer recognises: the part number that goes into a car.

Zonbo leads with the box. It also claims a board line. The gap between those two statements is the whole of this profile.

Registration says appliances, not circuit boards

The business registry record gives 宁波中博电器有限公司 a credit code of 91330281554524260F, establishment on 20 May 2010, registered capital of RMB 10 million, and an address on Fengming Road in Yuyao. Majority shareholder 沈周洪 holds 88.8% per business databases, and is also the legal representative.

The registered business scope covers appliances, transformers, auto parts and electronic components. It does not list PCB manufacture. In China the scope line is not a hard prohibition — companies trade outside it routinely — but it is a declaration of what the company told the registry it does, and “electrical appliance” is in the name itself: 中博电器.

Combined with a catalogue of assemblies, the reasonable reading is a control-board EMS that buys laminate and may run a small fabrication line for quick turns. Whether that line exists on Fengming Road is the first thing to settle.

Two ages, two capital figures

The English site says the company has 11 years of engineering experience and prints a registered capital of RMB 1.5 million. The registry says established May 2010 and RMB 10 million of capital.

Neither pair agrees. A 2010 start makes the company 16 years old, not 11; the site may be quoting the age of the EMS business rather than the legal entity, or the page may simply be old. The capital difference is the more serious one: RMB 1.5 million against RMB 10 million is a factor of nearly seven, and this page takes the registry figure.

For a buyer, capital is a weak signal and an inconsistent one is a worse signal. It suggests the English site was written once, from memory, and never checked against the licence.

80 million placements and no machine list

Eighty million SMT spots a month is the one production figure with real content. On a nine-thousand-square-metre plant with 150 staff, 80 million placements implies roughly two to four high-speed lines running two shifts, depending on board mix and component count. That is a coherent small EMS.

The 12,000 m² a month of “PCB design and fabrication” is not coherent in the same way, because nothing supports it. No etcher, no drill count, no plating line, no layer ceiling, no minimum line width. A fabrication claim without a single process number is a marketing sentence.

There is a second section on the site for power inverters, which fits the appliance-and-transformer scope and the Yuyao supplier base. It does not add board capacity.

The certificate automotive buyers will ask about

IATF 16949:2016 is named on the profile as an approval. No certificate number, no certification body, no scope, no expiry. ISO 9001 is still quoted at the 2008 revision, which was superseded in 2015 — a decade-old line on a page that also claims the 2016 automotive standard.

UL, CE, FCC and RoHS appear together as product approvals. For an assembly house that is normal and legitimate: the marks belong to the end product. But it means there is no UL file for the bare board, and if your assembly needs a recognised laminate, that has to come from whoever fabricated it.

The certification question for Zonbo is therefore narrower than for a board shop: not “is your UL file current” but “which IATF certificate covers this plant, and does its scope include assembly of automotive control boards”.

How to place a board order with an assembler

Fit first. Zonbo suits automotive body-control assemblies in the hundreds to the low thousands, where sourcing, SMT and box-build sit with one small team and eleven engineers can answer questions directly. It does not suit a bare-board programme that has to show a fabricator’s certificate package.

Decide first what you are buying. If it is assembled control boards, Zonbo’s profile fits the work: automotive body electronics, small runs, engineering support from 11 people, turnkey and box-build listed.

If it is bare boards, ask three questions before sending a drawing. Does the Fengming Road plant fabricate, or broker? If it fabricates, what is the layer ceiling and who etches? And if it brokers, which fab is used, and will that fab’s name appear on the certificate of conformance?

The answers separate a genuine fabricator from a trading desk. Either can be a fine supplier; only one of them can be audited as a board shop.

What is not established

No layer count, no panel size, no copper weight, no minimum line and space, no equipment list and no monthly capacity that can be traced to a machine count. The IATF certificate number is unpublished. Employee count is a single self-reported figure of 150 with nothing to cross-check it against. Whether PCB fabrication happens in-house at all is unresolved, and this page treats the company as a control-board EMS until a buyer confirms the board line on site — ideally by walking the etch and plating area, not the SMT floor.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Plant area (English company profile) 9,000 m²
Employees (English company profile) 150
Engineers (English company profile) 11
Monthly PCB fabrication claimed 12,000 m²/month
Monthly SMT placement claimed 80 million spots/month
Registered capital as printed on the company site RMB 1.5 million
Engineering experience quoted on site 11 years

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Written as approved by IATF16949:2016, with no certificate number, certification body, scope or expiry date.
ISO 9001:2008 The 2008 revision is still printed. No number, no body, and no sign of transition to the 2015 edition.
UL / CE / FCC / RoHS Presented as product approvals. No UL file number and no certificate IDs, so none of them can be tied to board fabrication, only to finished assemblies.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.