Yangzhou Elec & Eltek - Elec & Eltek / Kingboard
扬州依利安达电子有限公司 · Jiangsu · Founded 2010 · Not listed; parent Kingboard Holdings (HKEX 0148)
Yangzhou Elec & Eltek has four conflicting capacity figures spread across five or seven build phases, and only added HDI to the plant in 2025.
Consider Yizheng for 2-to-12-layer rigid boards and, from 2025, early HDI and 77/79 GHz radar work. Do not quote a single capacity without naming the phase and the source. Confirm that the Chinese legal entity on the order is Yangzhou Elec & Eltek, not the Hong Kong holding company or another Kingboard base.
Identity and record
| Registered name (Chinese) | 扬州依利安达电子有限公司 |
|---|---|
| Registered name (English) | Yangzhou Elec & Eltek Co., Ltd. |
| Founded | 2010 |
| Listed | Not listed; parent Kingboard Holdings (HKEX 0148) |
| Headquarters | Jiangsu |
| Production sites | Yizheng (Yangzhou) · Guangzhou · Kaiping · Thailand |
| Unified social credit code | 91321081555815043N |
| Official website | https://www.eleceltek.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
Four capacity numbers, four vintages
Nothing about this plant’s output can be quoted without first asking which year the number was written down. The Chinese legal entity is 扬州依利安达电子有限公司, in English Yangzhou Elec & Eltek Co., Ltd., registered on 2010-05-27 with USD 312 million of registered capital and unified social credit code 91321081555815043N. It is wholly held by Elec & Eltek Yangzhou (Hong Kong) Limited and sits inside Kingboard Holdings (HKEX 0148); the Elec & Eltek group was founded in Hong Kong in 1972, acquired by Kingboard in 2004 and wholly owned by it from 2020. The group runs bases in Guangzhou, Kaiping, Yizheng (Yangzhou) and Thailand. The plant sits in the Yizheng Economic Development Zone at 1 Shidai Avenue.
Four capacity figures, then. The Yizheng government hiring notice gives phase 1 as 1.8 million m² a year of high-density board and 10 million m² a year once all seven phases are complete. An industry database says 200,000 m² a month, with phase 2 from end-2021 adding 40,000 m² a month. TPCA describes the whole 800-mu park, at RMB 3 billion total investment, as reaching 1 million m² a month of rigid board when fully built. A 2025 government article puts that year’s output budget at RMB 1.25 billion. These are not four measurements of one line; they are a phase-1 permitted figure, full-build plans, a directory snapshot and a revenue target. The record itself flags that the four numbers use different phase staging and statistical bases.
Five phases or seven
TPCA’s member record describes the project in five phases; the Yizheng government and business-registry material describe seven. There is no published reconciliation. Phase 1 is the only one with a firm start: mid-2012, RMB 800 million of investment, 320 mu, a 45,000 m² plant laid out as single-direction single-layer lines, and a 2-to-12-layer product plan. A separate government line gives phase 1 as USD 99.8 million investment, USD 54 million registered capital, 326 mu and 152,000 m² of building. Phase 2 started in December 2022, but the industry database says end-2021 — a one-year disagreement — and the government says it opened with only about 60 staff. Workforce figures split too: about 1,600 for phase 1, over 6,000 at full seven-phase build, 1,500 in the 2025 media report, and 583 in a 2024 social-insurance-based encyclopedia entry. Revenue splits between RMB 1.3 billion for 2023 and RMB 1.143 billion in an encyclopedia transcription, neither backed by an annual-report original.
Yangzhou only added HDI in 2025
The group site advertises multilayer boards up to 50 layers including HDI, and an automotive page lists 77 GHz and 79 GHz radar PCB. Those are group-level claims. The Yizheng plant itself was specified for 2-to-12-layer rigid boards when it opened, and only in 2025 did the company put a new HDI project into a new building, calling it a new growth point. A 2025 report has 1,500 workers back on site in February with an RMB 1.25 billion output budget for the year. So a buyer reading “up to 50 layers” on eleceltek.com is reading the group ceiling, not a Yizheng process limit; the group site does not break out Yizheng parameters at all.
Why this page is filed at province level
Yangzhou has no city-level page in this series, so this profile is filed under Jiangsu rather than under a Yangzhou hub. The same applies to the other plants in this batch that sit outside Wuxi. For a sourcing team the consequence is practical: the administrative evidence here comes from Yizheng municipal and Jiangsu provincial notices, not from a Yangzhou city industry portal. A factory check therefore has to be assembled from county-level government releases, a Taiwanese industry association record and third-party databases, with no single municipal page to anchor the visit. Ask for the plant’s own business licence and the phase-specific environmental acceptance documents on site, because no city page consolidates them.
The group site hides the Yizheng process limits
eleceltek.com is a group site: it lists up to 50 layers, HDI and five bases, but publishes no Yizheng line widths, hole sizes, board thicknesses or layer ceiling. The Chinese legal name matters here. If a quotation arrives under “Elec & Eltek” without the Yangzhou entity name, the order could be routed to Guangzhou, Kaiping or Thailand. Put 扬州依利安达电子有限公司 on the paperwork and ask the supplier to restate the capability for the Yizheng line specifically.
When Yangzhou is the right base
Standard 2-to-12-layer rigid boards, LCD-TV and monitor boards, and — from 2025 — early HDI and automotive radar work are the plausible fit. What is not established is a current Yizheng layer ceiling, a UL file number, 2024 revenue or even the final phase count. A capacity number quoted without its phase and source is not a delivery commitment.
Unresolved points in the Yizheng record
The phase count, the plant’s current layer capability, a UL file number and 2024 revenue are all unverified. The founding date appears as “April 2010” in one government article and 2010-05-27 in the registry. The registered capital of USD 312 million and the “RMB 3 billion total investment” are different measures and should not be converted into one another. No source publishes achieved output against the 1.8 million m² annual figure.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| Group layer range | Multilayer up to 50 layers including HDI; group says it runs five production bases |
| Automotive radar boards | 77 GHz and 79 GHz Radar PCB listed on the automotive page |
| Phase 1 scale, TPCA record | RMB 800 m investment, 320 mu, 45,000 m2 plant, mid-2012 start, 2-12 layers |
| Park master plan | 800 mu site, RMB 3 bn total; 1 million m2/month rigid board when fully built |
| Capacity, industry database | 200,000 m2/month; phase 2 from end-2021 adding 40,000 m2/month |
| Capacity, Yizheng government filing | Phase 1 1.8 million m2/yr high-density board; 10 million m2/yr after all seven phases |
| Workforce by phase | Phase 1 about 1,600 staff; over 6,000 once all seven phases reach full output |
| Phase 1 revenue | RMB 1.2 to 1.5 billion a year |
| Phase 2 startup | December 2022, with about 60 staff at launch |
| HDI project, 2025 | New HDI line in a new building; company projected RMB 1.25 bn output that year |
| Current headcount and budget | 1,500 workers on site February 2025; RMB 1.25 bn output budget for the year |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| High-Tech Enterprise (2018) | Yizheng plant recognised in 2018 per group material; certificate number and validity not published |
| ISO system and product certificates | Registry lists quality, environmental, occupational health, energy and voluntary product certification, without numbers |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.