High-Tg PCB Quotes: Tg, Td and T260 Explained
The premium over standard FR-4 is real, but it is not the main variable. What changes the price is whether one laminate grade runs through the whole stack or the build mixes grades, because a mixed stack constrains which press cycle can be used.
Lead times are industry ranges, not commitments. Any factory's actual date depends on its queue that week, and on what else is already scheduled.
ChinaPCB.org does not quote boards and takes no commission. This page exists so that the enquiry you send to a factory is complete the first time. Send it yourself — see how to send an RFQ.
What this quote is priced on
Five to seven variables move the number on a high-tg quote. They are not equally important, and only the first two are usually discussed.
- Laminate class. Mid-Tg and high-Tg families cost more per sheet, but the step is smaller than most buyers expect. The process consequences are larger than the material premium.
- Stack uniformity. A stack that uses one grade presses in a single window. Mixing grades forces a compromise temperature that suits neither, and yield pays for it.
- Layer count interaction. High-Tg laminate needs more heat and pressure to flow. On a high layer count that means longer cycles and more registration drift per press.
- Halogen-free variant. Often specified together with high Tg and priced separately. The two are independent requirements and should be stated independently.
- Drill and desmear. High-Tg resin is harder and more brittle. Drill parameters and desmear chemistry change, and tool wear raises cost per hit.
The parameters a factory needs
This is the set that has to be in the enquiry before a high-tg price means anything. The third column is why each one changes the answer, which is also the reason a quote that skips it is not really a quote.
| Parameter | What to state | Why it changes the answer |
|---|---|---|
| The Tg value you need | A number in °C, and the reason: reflow peak, operating temperature or layer count | Tg is a threshold, not a ranking. Stating the reason lets the factory tell you whether you need it at all. |
| Td at 5 % weight loss | Required Td, if the board sees high temperature or heavy copper | Td covers decomposition during reflow and press. A board can pass Tg and still fail Td on a thick, heavy-copper build. |
| T260 or T288 requirement | The time to delamination at a stated temperature, with the test method | This is the value that predicts delamination at reflow. It is not interchangeable with Tg and cannot be inferred from it. |
| CAF resistance | Whether the application requires CAF-resistant laminate, and the test | CAF matters for fine-pitch, high-layer boards at voltage. It is a separate qualification, not a property of "high Tg". |
| Uniform or mixed stack | Whether the same grade runs through all layers, and if not, which layers differ | A mixed stack constrains the press cycle and can force two cycles. It is a price step a laminate premium does not explain. |
| Reflow cycles to survive | Number of reflow passes, including rework, and the peak temperature | Each pass consumes thermal margin. Three passes at 260 °C is a different requirement from one. |
| Halogen-free status | Mandatory, preferred, or irrelevant, and who requires it | Halogen-free restricts the laminate shortlist and changes the press window. Treating it as a synonym for high Tg misprices the board. |
| Annual volume by variant | Volume per laminate variant, not the total across the product family | Each variant is a separate material buy. Averaging them hides the volume that determines the material price. |
Send with the enquiry
- The Tg, Td and T260 you need, each with a reason rather than just a value.
- Whether the stack uses one grade throughout, and if not, which layers differ.
- The reflow profile and the number of passes the board will see.
- Whether halogen-free and CAF resistance are requirements or preferences.
- Volume per variant, and the layer count of each.
Where it goes wrong
- Buying high Tg for a hand-soldered two-layer board. The material premium buys nothing the design needs, and the harder resin can drill and rout worse than the standard grade.
- Treating Tg as a quality score. A 180 °C laminate is not better than a 140 °C laminate in general. It is better for a specific thermal load, and worse if the load is not there.
- Mixing grades without saying so. A mixed stack forces a press compromise and shows up as delamination at the interface, usually after the second reflow.
- Halogen-free assumed. Quoting halogen-free as a free upgrade is common. It is not free, and the substitution is only discovered by a material certificate.
Comparing two high-tg quotes
Two prices are only comparable when the parameters above are held constant. Most of the spread buyers see comes from a difference in one of these, not from a difference in factory efficiency.
- Compare the same value. One quote may be answering Tg, another T260, and both may call it "high Tg".
- Check whether the stack is uniform. A uniform stack at a lower Tg can outperform a mixed stack at a higher one.
- Compare the number of reflow passes assumed. Thermal margin is consumed per pass, not per board.
- Ask for the laminate datasheet, not just the class name. Two 170 °C laminates can differ in Td by 20 °C.
What this page does not tell you
This page does not tell you which Tg to specify. That follows from your reflow peak, your layer count and your expected service life, and getting it wrong in either direction costs money for no benefit.
Related
- High-Tg boards: why Tg, Td and T260 must be separate numbers
- FR-4 quotes: the family behind the grade
- 6-layer quotes: where layer count meets laminate choice
- Rogers quotes: when FR-4 stops being an option
Fee structure and editorial independence are described on the about page. What we can and cannot confirm about a factory is on how we verify.