Factory profile · Public sources reviewed

YD Electronic (Yidong)

奕东电子科技股份有限公司 · Dongguan, Guangdong · Founded 1997 · SZSE ChiNext 301123, listed 2022

The listing reads like an electronics company; the business is FPC, connectors and backlights. Rigid PCB is one new project that lost money in 2025.

Shortlist YD Electronic for a flex circuit, a BMS harness or a connector-plus-FPC assembly, not for a rigid multilayer board. Its rigid PCB capacity is a single new project in Pingxiang, still absorbing start-up costs, so a rigid board enquiry should go to a factory that has been building them for a decade.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 奕东电子科技股份有限公司
Registered name (English) YD Electronic Technology Co., Ltd.
Founded 1997
Listed SZSE ChiNext 301123, listed 2022
Headquarters Dongguan, Guangdong
Production sites Dongguan · Changshu (Jiangsu) · Xianning (Hubei) · Suining (Sichuan) · Pingxiang (Jiangxi) · Liuzhou (Guangxi) · Delhi (India) · Johor Bahru (Malaysia)
Official website https://www.ydet.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity YD Electronic (Yidong) and 4 named production sites, from the disclosures cited on this page. PUBLISHED RECORD YD Electronic (Yidong) 奕东电子科技股份有限公司 Founded 1997 · SZSE ChiNext 301123, listed 2022 Dongguan Site 1 Changshu Jiangsu Xianning Hubei Suining Sichuan +4 more sites named in the profile Source: disclosures cited on this page
Entity and footprint map. YD Electronic (Yidong) and the production sites named in the disclosures cited above.

The name promises more than the plant list delivers

A company called YD Electronic Technology, listed on ChiNext, sounds like a board house. It is not. The core business is flexible printed circuits for consumer electronics and battery-management systems, plus connector components and LED backlight modules. The English profile says so plainly, and the segment structure in the annual report confirms it.

This matters because a foreign buyer searching for a PCB supplier will find the listing, see 301123 and a revenue figure of RMB 2.27 billion, and assume a rigid multilayer factory. What they will actually reach is a precision-component manufacturer that also runs a new rigid PCB project. Two different supply relationships, two different qualification paths.

Where rigid boards actually come from

The Pingxiang printed-circuit-board project in Jiangxi is the rigid capacity. It was expanded in January 2023 by more than RMB 400 million, lifting planned output from 360,000 to 600,000 m² per year. The 2025 annual report attributes a net loss of RMB 66.85 million to start-up costs and depreciation at that project.

That is the clearest signal in the filing. A plant still carrying start-up losses is a plant still learning its yields, and a buyer who moves a qualified rigid design there is taking on process risk that a mature site would not impose. It is not a reason to avoid the company; it is a reason to separate the flex business from the rigid business in your evaluation.

The flex business is the mature one

FPC work started in 2009, and the first automotive BMS flex circuit was developed in 2013, which is early for this segment. Minimum line precision is published as 0.04 mm. Optical-communication components came in 2007, and the connector and structural-part lines serve the same customers.

For a battery-management harness or a flex-to-board interconnect, that is a relevant history: thirteen years of automotive flex experience with an IATF 16949 claim attached. The claim comes from a company profile in trade media rather than a certificate register, so ask for the certificate and the site scope.

The base list moves between reports

The English profile names six production bases: Dongguan, Changshu, Xianning, Suining, Huizhou and Delhi. The 2021 annual report lists the same six. The 2024 annual report lists six as well, but Huizhou has dropped out and Liuzhou has appeared.

A base list that changes without explanation usually means a site was closed, sold or absorbed. Before placing work at a specific site, confirm that it is still operating and that the legal entity named in the contract is the one that owns it. The company also lists Johor Bahru in Malaysia in some material, which adds a ninth location to an eight-city list.

How to use this profile

Send a flex enquiry with the bend radius, the dynamic or static duty, the stiffener and adhesive drawing, and the connector interface. Those four items decide the price and the yield in flex work far more than the layer count does.

For rigid boards, treat the company as a new entrant and ask for first-article data from the Pingxiang line, the process capability sheet with a revision date, and the IATF certificate naming that site. If the answer is a group-level certificate, the qualification is not finished.

What is not established

No UL file number could be found, so the UL claim should be treated as unverified. No rigid-board layer, drill or line/space table is published at all. Per-plant capacity, yield and employee count are not disclosed. The certification list comes from a media profile rather than the certificate register, and the plant list differs between annual reports, so the current site count cannot be fixed from public sources.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
FPC minimum line precision 0.04 mm
Pingxiang PCB line capacity 600,000 m² per year, raised from a planned 360,000
Production bases stated on the English profile Six: Dongguan, Changshu, Xianning, Suining, Huizhou, Delhi
Product scope FPC for consumer electronics and BMS, connector components, LED backlight modules
FPC business entered 2009
First automotive BMS flex circuit developed 2013
Optical-communication components entered 2007

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949:2016 Stated in the company profile carried by trade media; scope and site not given
ISO 9001:2015 Same source; no certificate number
ISO 14001:2015 Same source; no certificate number
QC 080000:2017 Hazardous-substance process management, same source
UL Mentioned without a file number; no UL listing was found under the company name during research

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.