Factory profile · Public sources reviewed

YCL (Inno Circuits)

四川英创力电子科技股份有限公司 · Sichuan · Founded 2011 · Not listed; ChiNext application withdrawn in 2022

Yingchuangli builds 2 to 48 layers in Suining and added IC and Mini-LED substrate lines in 2024. Its ChiNext application was withdrawn in 2022.

YCL is the strongest option in the Sichuan cluster for a quick-turn order or a mid-layer board, and it now runs an IC substrate line that most quick-turn factories lack. The trade-off is disclosure: it is unlisted, publishes no capacity or headcount, and its layer ceiling is stated two ways.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 四川英创力电子科技股份有限公司
Registered name (English) Sichuan Yingchuangli Electronic Technology Co., Ltd.
Founded 2011
Listed Not listed; ChiNext application withdrawn in 2022
Headquarters Sichuan
Production sites Suining (Sichuan) · Pingchang, Bazhong (Sichuan)
Official website https://www.iqpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity YCL (Inno Circuits) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD YCL (Inno Circuits) 四川英创力电子科技股份有限公司 Founded 2011 · Not listed; ChiNext application withdrawn … Suining Sichuan Pingchang, Baz… Sichuan Source: disclosures cited on this page
Entity and footprint map. YCL (Inno Circuits) and the production sites named in the disclosures cited above.

The Sichuan cluster needed a serious factory, and this is it

Sichuan’s PCB base is concentrated in Suining, and YCL is the largest local manufacturer with a public technical record. Founded in 2011 and headquartered in the Suining national development zone, it describes itself as among the top five Chinese quick-turn and prototype makers and in the national top 100 for eight consecutive years.

For a European or American buyer, the location has one practical consequence: a Sichuan supplier is roughly 1,500 km from Shenzhen, so a same-week engineering conversation is a flight rather than a taxi. The compensation is cost and, in YCL’s case, a technical range that goes beyond quick-turn.

The capability table is unusually complete

2 to 48 layers, 0.1 to 6.35 mm finished thickness, 6 oz inner and 10 oz outer copper, 20:1 aspect ratio, 6+N+6 HDI with up to seven laminations, a 70 µm laser via with a 25 µm pad, and an IC substrate line at 25/25 µm.

That is a real table, with values that hang together, and it covers substrate work that most quick-turn factories cannot offer. The 10 oz outer-layer copper is high for a factory positioned around prototypes, and it suggests a power-electronics customer base alongside the quick-turn business.

Two claims that do not match

The company’s table says 2 to 48 layers. A Suining municipal government report describes the company as producing boards from 2 to 40 layers. Both are plausible if the government figure is older or refers to a specific plant, but they are not the same number and neither is dated.

The other gap is design. The design centres in Chengdu, Suining and Changsha are quoted at 48 layers, 42,000 pins, 0.06 mm lines and 100G data rates, which is layout capability rather than fabrication capability. A design service that can lay out a 48-layer board and a factory that can build one are two different assurances.

Substrate work is new, and it is the differentiator

Phase three in Suining added IC substrates and Mini-LED substrates, with the local government reporting a January 2024 start-up and a RMB 1.4 billion full-year target for that year. A second plant in Pingchang, Bazhong, held its product launch in January 2026.

Substrate capability changes what this factory is. A quick-turn house that can also quote a 25/25 µm substrate is competing in a much smaller pool. Ask which line, which qualification, and what the yield is, because a new substrate line is a different risk profile from a mature multi-layer line.

An IPO that was withdrawn

The ChiNext application was accepted on 11 May 2022, withdrawn by the company on 29 July 2022, and the review was terminated by the exchange on 2 August 2022, under document 深证上审(2022)388号, with China Merchants Securities as sponsor.

A withdrawn application is not a red flag on its own; many companies withdraw and reapply. But it means there is no audited public financial history, no prospectus to read for capacity and customer concentration, and no exchange filing to check claims against. For a buyer, that shifts the evidence burden onto the factory visit and the certificate documents.

How to use this profile

Send the stack-up, the layer count, the copper weight and the quantity, and say whether the design is yours or needs layout. If layout is included, ask which design centre and who signs off the fabrication package.

Ask for the IATF certificate reference, the UL file number, and the process capability sheet for the Suining plant. For substrate work, ask for a first-article report and the line’s qualification date.

What is not established

No floor area, monthly output or employee count is published anywhere on the site. No UL file number or certificate number is published; certificates appear as images. The unified social credit code and registered capital are not published by the company. The 48-layer figure is a table value rather than a tested production record, and the competing 40-layer figure from local government remains unexplained.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count, rigid multilayer 2–48 layers
Finished board thickness 0.1–6.35 mm
Max copper thickness 6 oz inner layer, 10 oz outer layer
PTH aspect ratio 20:1
HDI build-up 6+N+6; maximum 7 laminations
Min laser via and pad 70 µm via, 25 µm pad
IC substrate minimum line width and space 25/25 µm
Design centre capability 48 layers, 42,000 pins, 0.06 mm minimum line, 100G data rate
Two layer ranges for one table Bar chart of 2 published figures in layers, upper bound of the published rigid-board range. The company table says 2-48 layers; a Suining government report says 2-40. Neither is dated, so both stay on the record. The 48-layer design-centre figure is layout capability, not fabrication, and is excluded. Company table 48 layers 2-48 layers in the company table Gov report 40 layers 2-40 layers in a government report
Two layer ranges for one table. layers, upper bound of the published rigid-board range. The company table says 2-48 layers; a Suining government report says 2-40. Neither is dated, so both stay on the record. The 48-layer design-centre figure is layout capability, not fabrication, and is excluded. Source: Company capability table and Suining municipal government report.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 Listed in the system-certification gallery; no number or issuing body
ISO 9001:2015 Gallery image labelled with the 2015 version
ISO 14001:2015 Gallery image
ISO 45001:2018 Gallery image
UL and CQC Gallery items; no UL file number published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.