Factory profile · Public sources reviewed

Worldex (Olympic Circuit)

广东世运电路科技股份有限公司 · Guangdong · Founded 1985 · SSE 603920

Worldex publishes one capability grid for four families and supplies six named car makers. Its English site is also about a billion renminbi out of date.

Worldex is a credible automotive-first factory with one of the clearer capability grids in this directory and an unusual amount of named customer evidence. The caveats are documentation rather than manufacturing: the English site is stale, the certificates are asserted without numbers, and the grid is not split by plant.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 广东世运电路科技股份有限公司
Registered name (English) Guangdong Worldex Circuit Technology Co., Ltd.
Founded 1985
Listed SSE 603920
Headquarters Guangdong
Production sites Heshan, Jiangmen (headquarters) · Heshan, Jiangmen (Shimao Electronics, phase 2) · Thailand (Gao Feng Green Industrial Park)
Official website http://www.olympicpcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Worldex (Olympic Circuit) and 3 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Worldex (Olympic Circuit) 广东世运电路科技股份有限公司 Founded 1985 · SSE 603920 Heshan, Jiangm… headquarters Heshan, Jiangm… Shimao Electroni… Thailand Gao Feng Green I… Source: disclosures cited on this page
Entity and footprint map. Worldex (Olympic Circuit) and the production sites named in the disclosures cited above.

A capability grid that covers four families at once

The English capability page is a single grid covering high-layer-count boards, HDI, flex and rigid-flex, and insulated metal substrate. Layer count runs 1–24 for high-layer-count and 4–24 for HDI, with a 5+N+5 any-layer structure. Panel size tops out at 724 × 622 mm, lines at 0.05/0.05 mm, mechanical drills at 0.15 mm, laser holes at 0.075 mm, and PTH aspect ratio at 12:1.

That is a coherent, buildable set of numbers: nothing in the grid requires a process the rest of the grid cannot support. It is also a grid for the whole company, not for a plant, so a 24-layer HDI and a 2-layer metal-core board are described by the same page even though they are not made the same way.

The 12:1 aspect ratio is the row worth pausing on. It is lower than the 20:1 to 25:1 that backplane factories publish, which is consistent with a product mix centred on automotive control and power boards rather than on telecom backplanes. If your design needs 18:1, this is not the supplier.

Six named car makers, and what naming them means

The company’s 2025 results coverage names Tesla, BMW, Volkswagen, Porsche, Mercedes-Benz and unnamed Chinese EV makers as customers, with automotive the largest end market. Reported revenue was RMB 5.577 billion, up 11.05%, with net profit of RMB 684 million, up 1.37%.

Named customer relationships are among the few pieces of evidence a buyer can use without an audit. They do not prove that your programme will be handled well, but they do establish that the factory has passed the supplier qualification of several European and American automotive OEMs, which is a documented process with site audits. For an automotive Tier 1 or Tier 2, that is a meaningful starting point.

The flat profit growth against double-digit revenue growth is also worth noting: automotive PCB pricing has been under pressure, and volume growth without margin growth is what that looks like.

The English site is about a billion renminbi behind

The English about page still quotes annual sales above RMB 4.5 billion, a figure that predates the 2025 result of RMB 5.577 billion. It also states a founding year of 1985 and a listing year of 2018, while the Chinese site gives 2017 for the listing.

Small inconsistencies, but they tell you the English site is not maintained. Use the Chinese site and the filings for anything that matters, and ask the factory for a dated company profile rather than quoting a website.

Three sites, three roles

The Heshan headquarters plant is the listed entity and is where this profile’s capability data applies. Expansion sits in subsidiaries: Heshan Shimao Electronics, a new plant with 3 million m² per year of capacity and a phase 2 due in 2027, and Olympic Circuit Thailand, with 1.2 million m² per year in phase 1, construction started in November 2024 and mass production during the first half of 2026.

A third project, called 芯创智载, is planned next to the headquarters: about RMB 1.5 billion for 660,000 m² per year of chip-embedded PCB and high-end HDI, with a pilot line completed in the first quarter of 2026 inside the existing plant. Chip-embedded boards are a genuinely different process, and a pilot line is not a production qualification.

A technical note on crawling this site

The homepage of olympicpcb.com is served through an obfuscated JavaScript redirect, so automated tools see an empty page. The sub-pages, such as capa.php, are readable. That is worth knowing if you are building a supplier database: a crawler will report this company as having no content, which is wrong.

How to use this profile

Shortlist Worldex for an automotive control or power board at volume, especially if your customer list overlaps with the OEMs it already serves. Send the stack-up with the aspect ratio and panel utilisation stated, and confirm the 12:1 limit early.

Ask for the IATF certificate number and the site it covers, and ask whether the Thai plant holds its own certificate or operates under the Chinese one. Given the phase-2 capacity arriving in 2027, also ask how allocation between Heshan and Thailand will be decided.

What is not established

No UL file number is published. No certificate number, issuing body or validity date is published for any standard, so the automotive claim rests on the customer list and the filings rather than on the certificate record. Per-plant capacity, copper weight by product family and customer concentration are not disclosed.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count, high-layer-count boards 1–24 layers
Layer count, HDI 4–24 layers
HDI structure 5+N+5, any layer
Board thickness, high-layer-count 0.3–3.4 mm
Max panel size 724 × 622 mm
Min line width and space, inner and outer 0.05/0.05 mm
Mechanical drill diameter 0.15 mm and above
Laser hole diameter 0.075 mm and above
Max PTH aspect ratio 12:1
Base copper thickness, high-layer-count 1/3 oz to 6 oz
Surface finishes HASL-LF, HASL, ENIG, immersion tin, OSP, immersion silver, gold finger, selective OSP
Annual capacity, group claim Above 5,000,000 m²
The English page is a billion behind Bar chart of 2 published figures in RMB million, annual sales. The English about page still quotes above RMB 4.5bn; the 2025 result is RMB 5.577bn. The first is an older undated figure, not an alternative measure. The 1985 founding and 2018 listing dates on that page are excluded. English page 4,500m above RMB 4.5bn, undated 2025 result 5,577m reported 2025 annual sales
The English page is a billion behind. RMB million, annual sales. The English about page still quotes above RMB 4.5bn; the 2025 result is RMB 5.577bn. The first is an older undated figure, not an alternative measure. The 1985 founding and 2018 listing dates on that page are excluded. Source: English about page and 2025 results quoted on this page.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
IATF 16949 Asserted in a single sentence with no certificate number, issuing body or scope
ISO 9001 Same sentence, no number
ISO 14001 Same sentence, no number
ISO 13485 Same sentence, no number
ISO 45001 Same sentence, no number
UL, CQC and DE Stated as held; UL file number not published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.