Factory profile · Public sources reviewed

Sandeguan Precision Circuit (Shenzhen)

深圳市三德冠精密电路科技有限公司 · Shenzhen, Guangdong · Founded 2003 · Not listed; 49% held by SZSE-listed Suntak 002815

Suntak holds 49% of Sandeguan and guaranteed part of a 2026 bank line for it. The FPC maker narrowed its loss but remains loss-making.

Sandeguan is a genuine FPC maker with a production licence that names flexible boards and two Songgang factory addresses. It is not a Suntak subsidiary: the listed group holds 49%, reported a 2026 first-half loss at the unit, and guaranteed part of its bank credit. Good for display-module flex; check financial and legal standing first.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 深圳市三德冠精密电路科技有限公司
Founded 2003
Listed Not listed; 49% held by SZSE-listed Suntak 002815
Headquarters Shenzhen, Guangdong
Production sites Shenzhen (Songgang, Bao'an) · Zhuhai (wholly owned subsidiary)
Unified social credit code 91440300746617832U
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Sandeguan Precision Circuit (Shenzhen) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Sandeguan Precision Circuit (Shen… 深圳市三德冠精密电路科技有限公司 Founded 2003 · Not listed; 49% held by SZSE-listed Suntak… Shenzhen Songgang, Bao'an Zhuhai wholly owned sub… Source: disclosures cited on this page
Entity and footprint map. Sandeguan Precision Circuit (Shenzhen) and the production sites named in the disclosures cited above.

A licence that actually says flexible boards

Unlike several suppliers in this directory, Sandeguan’s registered scope names the product. It reads “manufacture and sale of flexible circuit boards, excluding the ammonia-etching process”, plus import and export under a specific permit, with a licensed line for PCB connectors and new electronic devices. Two production premises are listed, both in Songgang, Bao’an: Building 50 of the Haoyong First Industrial Zone and a plant on Gongye 1st Road in Xitou.

That makes this a real factory, not a catalogue. The exclusion is worth noticing too. If ammonia etching is outside the licensed process at the registered site, ask which entity performs that step and where, and whether the environmental approval covers it. A single excluded process is a normal subcontracting arrangement; it is also the kind of detail that disappears when a website says “full in-house capability”.

49 percent is not a subsidiary

Suntak bought 20 percent for RMB 180m in 2018 and another 20 percent for RMB 180m in 2019, with an agreement to continue toward 60 percent once conditions were met. Public reporting in 2020 said those conditions had not been fully satisfied, and an October 2026 report describes Sandeguan as a 49 percent associate, not a controlled subsidiary. The listed group’s guarantee that month was proportional: an RMB 80m credit line from SPD Bank Shenzhen, with Suntak covering up to RMB 39.2m at its 49 percent share while the other shareholders guaranteed the full amount.

For a buyer the distinction is practical. Suntak’s quality systems, certificates and financial strength are not automatically Sandeguan’s. Ask which company signs the order, which one is named on the approvals, and whether any group-level supplier code you were shown actually extends to this associate.

Commercial health belongs in the qualification file

The same 2026 report says the unit lost RMB 9.63m in the first half of 2026, an improvement of 68.8 percent against a RMB 30.86m loss a year earlier, with order-mix optimisation and cost control under way. An encyclopaedia record counts 34 court cases by the end of 2024, including one enforcement matter with a subject amount of RMB 82.01m, and notes a pledge of 1,000 tonnes of carbon allowance in May 2025.

None of these proves the plant cannot deliver. They do mean that a long programme should be qualified with eyes open: ask for recent audited accounts, credit terms, and a continuity plan for tooling and stock. A narrowing loss is a positive direction, but it is still a loss.

Rankings and customers come from acquisition documents

The 2019 Suntak announcement and two industry association reports describe a company founded in 2003, rated 31st among domestic PCB firms and fifth among FPC firms in the 2017 CPCA ranking, supplying BOE, Tianma, Truly, Innolux and others, with foldable-phone FPC work for BOE, Royole and Visionox. A trade association report quotes a 2017 net margin of 6.76 percent and return on equity of 32.01 percent.

All of these were written to explain an acquisition, and all are seven to nine years old. They are useful evidence that the factory had real capability and real customers, but they are not current qualification statements. A 2017 ranking and a 2017 margin say nothing about a 2026 line.

What to verify first

  • The current business licence and legal representative, and which of the two Songgang sites runs your part.
  • Who performs the excluded ammonia-etching process and under which environmental approval.
  • Certificate PDFs with the holder name, since the sources here give awards rather than numbers.
  • Current financial standing and any material enforcement matters before committing long-lead tooling.
  • Whether any Suntak group approval cited in a sales conversation actually covers a 49 percent associate.

What is not established

  • No UL, IATF or ISO certificate number, holder or scope was located.
  • Current FPC monthly capacity, layer range and minimum feature sizes are not published here.
  • The operating status and output of the Zhuhai subsidiary were not found.
  • Whether the 2017 customer qualifications remain active is unconfirmed.
  • Which entity holds process approvals after the partial acquisitions was not stated.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Registry: incorporation, capital and credit code Incorporated 2003-02-19; RMB 80m capital; USCC 91440300746617832U
Production licence explicitly covers FPC Manufacture and sale of flexible boards, excluding the ammonia-etching process; PCB connectors
Two named production premises Haoyong First Industrial Zone and a second plant on Gongye 1st Road, Xitou, Songgang
Suntak stake-building, 2018 and 2019 RMB 180m for 20% in 2018, another RMB 180m for 20% in 2019; now 49%
Industry ranking cited in a 2019 filing 31st among domestic PCB firms and 5th among FPC firms in the 2017 CPCA ranking
Named display customers in a 2019 filing BOE, Tianma, Truly, Innolux and China Display; foldable-phone FPC to BOE and Royole
First-half 2026 result at the unit Loss of RMB 9.63m, narrowed 68.8% from RMB 30.86m a year earlier
October 2026 guarantee by Suntak RMB 80m credit line; Suntak guarantees up to RMB 39.2m at its 49% holding
Zhuhai subsidiary and legal record Zhuhai Sandeguan founded 2017-11-02; 34 court cases by end-2024, one enforcement of RMB 82.01m
First-half losses narrowed year on year Bar chart of 2 published figures in RMB million, loss at the unit in two first halves. The October 2026 guarantee report gives a RMB 9.63m loss for H1 2026 against RMB 30.86m a year earlier, a 68.8% narrowing. A narrowing loss is still a loss. H1 2025 RMB 30.86m loss a year earlier H1 2026 RMB 9.63m loss narrowed 68.8%
First-half losses narrowed year on year. RMB million, loss at the unit in two first halves. The October 2026 guarantee report gives a RMB 9.63m loss for H1 2026 against RMB 30.86m a year earlier, a 68.8% narrowing. A narrowing loss is still a loss. Source: October 2026 Suntak guarantee report.

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
Awards, not certificate numbers Filings and association reports list supplier awards and CPCA membership but give no UL, IATF or ISO certificate numbers or holders.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.