Avary Holding (Shenzhen)
鹏鼎控股(深圳)股份有限公司 · Shenzhen, Guangdong · Founded 1999 · SZSE 002938, listed 2018-09-18
Avary's 2018 listing document gives a Songgang factory as its address; the current registry gives a 27th-floor office in Bao'an.
Avary is a genuine large PCB group, but the listed Shenzhen entity is now a headquarters: filings place production in Huai'an, Qinhuangdao and Yingkou while the registered address is an office tower. Suits high-volume FPC, SLP and HDI with long qualification, not quick-turn. Confirm the signing entity and plant.
Identity and record
| Registered name (Chinese) | 鹏鼎控股(深圳)股份有限公司 |
|---|---|
| Registered name (English) | Avary Holding (Shenzhen) Co., Limited |
| Founded | 1999 |
| Listed | SZSE 002938, listed 2018-09-18 |
| Headquarters | Shenzhen, Guangdong |
| Production sites | Shenzhen (Songgang, Bao'an) · Huai'an (Jiangsu) · Qinhuangdao (Hebei) · Yingkou (Liaoning) |
| Unified social credit code | 9144030070855050X9 |
| Official website | https://www.avaryholding.com/ |
| Evidence level | Public sources reviewed |
| Last reviewed | 2026-11-11 |
An address that stopped being a factory
Two official documents describe the same legal person twenty-odd years apart and give completely different kinds of places. The 2018 IPO listing announcement records the registered address as buildings A1 to A3 of Pengding Park on Songluo Road, Yanluo Street, Bao’an, with additional operating premises on Yanshan Avenue. Those are factory buildings. The current registry record gives the 27th floor of Block A, Pengding Times Building, on Haixiu Road in the same district. That is an office tower, and the newer filing also adds property development, leasing and car-park operation to the business scope.
Nothing here suggests the plants vanished. The change tells you what the Shenzhen company has become: a listed headquarters that holds the group’s manufacturing subsidiaries and property, rather than the address you would audit for a specific board. A buyer who copies the registered address from a business licence into a supplier audit invitation may end up touring a corporate floor, not a lamination press.
Revenue is reported by application, not by process
The 2022 annual report splits RMB 36.21bn of revenue into communications boards (RMB 22.67bn), consumer electronics and computer boards (RMB 13.20bn), and a smaller automotive, server and other bucket. That report publishes neither a maximum layer count, a monthly square-metre figure nor a drill table. The technology section names dynamic folding, thin mainboards, heterogeneous integration, 5G modules and AI server mainboards as development directions, with RMB 1.672bn of R&D spend at 4.62 percent of revenue.
That is normal for a listed group reporting to investors, but it inverts what a procurement engineer needs. A 2022 annual report cannot be used to compare Avary with a mid-size shop on a line-width table. Ask the sales entity for a capability document naming one site instead: layer range, minimum trace and space, aspect ratio, HDI stack-up and surface finishes, all tied to that plant.
Where the capacity was actually being added
The same 2022 report is more useful on footprint than on process. Huai’an Park 1 had largely finished its conversion, Park 3 phase 1 had completed civil works with installed lines then in customer qualification, and a Kaohsiung park was topped out in January 2023. The IPO document four years earlier listed four mainland manufacturing bases: Shenzhen, Qinhuangdao, Huai’an and Yingkou. Press coverage in 2026 describes an RMB 11bn high-end PCB project in Huai’an through the wholly owned Qingding Precision, plus a Thailand park in volume production and a new Shenzhen third park under construction.
Read those as a timeline, not a current site list. A line in customer qualification is not a qualified line. A project announced this year is not capacity you can book next quarter. If your programme depends on a particular geography for tariff, logistics or customer audit reasons, get the plant name in writing before the technical discussion starts.
What the Shenzhen entity actually is
The legal person was incorporated on 29 April 1999 as Fu Kui Precision Component (Shenzhen), converted into a joint stock company in May 2017, and listed on the Shenzhen main board in September 2018 under 002938. Its unified social credit code, 9144030070855050X9, is identical in the 2018 registration announcement, the IPO document and the current registry. The registry shows 47,573 employees and registered capital of RMB 2,317.54m. The 2025 full-year figures reported in the press are RMB 39.147bn of revenue and RMB 3.738bn of net profit.
So this is neither a trading name nor a shell. It is a very large, audited manufacturing group. The point is narrower and more practical: the group, the listed entity and the plant that presses your boards are three different things, and the public documents name each of them in a different place.
How to use this profile in a supplier file
For high-volume flexible, SLP or high-stage HDI work with a long qualification runway, Avary belongs on a shortlist. For a two-week prototype, a broker or a quick-turn shop is a better fit, and nothing on the company’s public pages suggests otherwise. When you do engage, put four questions in the first RFQ: which legal entity will issue the quotation, which plant will run the order, which certificate holder covers that plant, and whether the line handling your product is already in volume production. Those answers are not in the annual report.
Four years later, the numbers did appear
Saying that no capability table is published would now be wrong, but the document that changed it is not an annual report. In October 2026 the company replied to reviewers’ questions about a proposed share issue and set out what the new high-order HDI lines are being built to do: mSAP-based SLP up to 22 layers, 34-layer HDI, 16-layer any-layer interconnect, 20/20 μm minimum line and space, a 50 μm minimum hole, buried-via interconnection and stacked microvias. It names low-loss laminates, back-drill stub control, embedded components and embedded traces, and says the SLP range of 10 to 22 layers is intended for 800G, 1.6T and next-generation 3.2T optical modules, while HDI above six stages and 20 to 34 layers targets next-generation AI server platforms.
The company’s own HDI product page is more modest and more useful for today: 40/40 μm line and space in volume production, 30/30 μm on samples, 4 to 14 layers including any-layer, board thickness 0.25 to 2.1 mm, microvia build-up and mainly halogen-free material. Two figures for the same family therefore differ by a factor of two. One describes a proposed project design and the other a published shipping process; the reply says the products themselves are already in volume production and that the project is an expansion. Neither page names a plant. Before treating 20/20 μm as available capacity, ask which site holds that line, whether it has shipped a board at that geometry, and which customer qualification covers it.
Why the disclosure changed shape
The same October 2026 reply breaks revenue out by process rather than application: HDI products contributed RMB 4.640bn in 2023, RMB 5.787bn in 2024, RMB 6.958bn in 2025 and RMB 3.918bn in the first half of 2026. Within the compute segment it reports RMB 310.46m of HDI revenue for 2025 and RMB 772.79m for the first half of 2026, split between high-speed optical modules and AI servers. The 2022 annual report, by contrast, sorted the same company’s sales into communications and consumer buckets because it was written for shareholders.
That is the practical lesson for a supplier file: process limits tend to surface in regulatory replies, environmental filings and product pages, not in the annual report or the corporate brochure. For a buyer screening high-volume FPC, SLP or high-stage HDI work, this changes where to look. It does not change the outstanding gap — none of these documents ties a layer count, a drill limit or an impedance tolerance to the plant that would run an order, and the half-year 2026 figure is not an annual rate.
What is not established
- Process figures were located for HDI and SLP product families, but no plant-level layer count, monthly capacity or qualified feature-size table tied to a named site was found.
- No UL file number or certificate holder tied to a named base was located.
- The current status of the Yingkou base and of each Huai’an park is not confirmed by a recent site-level disclosure in these sources.
- Customer names and qualification status are not published; do not infer them from the product categories above.
- The registered address is an office. The factory addresses to audit were not verified in this review.
Published limits
Every value below is quoted as published by the company or a public record.
| Parameter | Value as published |
|---|---|
| 2022 revenue and net profit | RMB 36,210.97m revenue, up 8.69%; net profit RMB 5,011.54m, up 51.07% |
| Revenue split by application, not by layer count | Communications boards RMB 22,673.60m; consumer and computer boards RMB 13,201.46m |
| R&D spend as a share of revenue | RMB 1.672bn in 2022, equal to 4.62% of revenue |
| Huai'an project status in the 2022 report | Huai'an Park 1 conversion largely complete; Park 3 phase 1 lines in customer qualification |
| Manufacturing bases named at IPO | Shenzhen, Qinhuangdao, Huai'an and Yingkou |
| Registered address at IPO | Buildings A1-A3, Pengding Park, Songluo Road, Yanluo Street, Bao'an, Shenzhen |
| Current registered address and entity data | 27/F, Block A, Pengding Times Building, Haixiu Road, Bao'an; USCC 9144030070855050X9 |
| Headcount, capital and incorporation date | 47,573 employees; registered capital RMB 2,317.5367m; incorporated 1999-04-29 |
| 2025 full-year results reported in the press | Revenue RMB 39.147bn, up 11.40%; net profit RMB 3.738bn, up 3.25% |
| 2026 Huai'an investment announcement | RMB 11bn high-end PCB base through wholly owned Qingding Precision |
| HDI product page: volume and sample feature sizes | 40/40 um line and space in volume, 30/30 um on samples; 4-14 layers incl. any-layer |
| HDI build-up range on the same product page | 0.25-2.1 mm board thickness; microvia build-up process; mainly halogen-free materials |
| October 2026 regulatory reply: project design limits | mSAP SLP up to 22 layers; 34-layer HDI; 20/20 um line and space; 50 um min hole |
| HDI revenue by year, from the same regulatory reply | RMB 4.640bn (2023), 5.787bn (2024), 6.958bn (2025), 3.918bn (2026 H1) |
| Compute-sector HDI revenue split in that reply | RMB 310.46m in 2025 and 772.79m in H1 2026 across optical modules and AI servers |
Certifications on record
A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.
| Standard | What the record shows |
|---|---|
| No UL file number located | Neither the annual report extract nor the company product pages reviewed publish a UL file number or a certificate holder tied to a named plant. |
Ask this factory for a quote
Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.
Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.