Factory profile · Public sources reviewed

Ningbo Wakan Electronic Science & Technology

宁波华远电子科技有限公司 · Ningbo, Zhejiang · Founded 2005 · Not listed (regional equity display only; code 720379 unconfirmed)

Wakan's domain is dead and its only first-party pages are two WeChat posts. The Kelvin test claims are auditable; the headcount and capacity are not.

A flex and substrate maker in Yuyao with real test equipment and an odd publishing habit: no working website, two WeChat posts, and a certification timeline hosted by a university. Good fit for FPC and SiP work you can audit in person. The 600-employee and 40,000 m²/month figures cannot be confirmed.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 宁波华远电子科技有限公司
Registered name (English) Ningbo Wakan Electronic Science & Technology Co., Ltd.
Founded 2005
Listed Not listed (regional equity display only; code 720379 unconfirmed)
Headquarters Ningbo, Zhejiang
Production sites Yuyao (Zhongyi Ningbo Eco-Park, Xingbin Road)
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Ningbo Wakan Electronic Science & Technology and 1 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Ningbo Wakan Electronic Science &… 宁波华远电子科技有限公司 Founded 2005 · Not listed (regional equity display only; … Yuyao Zhongyi Ningbo E… Source: disclosures cited on this page
Entity and footprint map. Ningbo Wakan Electronic Science & Technology and the production sites named in the disclosures cited above.

Two WeChat posts are the whole first-party record

The domain printed in the company’s own filings, wakan.cn, returns HTTP 502. The near-miss wakan.com.cn now belongs to an unrelated food-supply business. So the usual first stop — a factory site with a capability page — does not exist here.

What exists is two articles on the company’s WeChat account. One is a recruitment post from 2025 that describes the plant and its three product lines. The other is a 20th-anniversary piece that describes a 2012 move into the current building and a testing upgrade. That is the entire set of pages the manufacturer publishes about itself and that a foreign buyer can open.

This is not the same as an empty record. It is a record that was written for Chinese job applicants and local readers, which shapes what it contains: floor space and workshop equipment get described, certificates and layer counts do not.

What the plant does say, in process terms

The anniversary article is unusually specific for this kind of post. It reports Kelvin four-wire electrical test with resolution down to the milliohm level, a combined via-plus-trace test method for blind and buried boards, hole-wall copper thickness measured to within 1 to 2 µm, and a 300% gain in test throughput after automating the test floor.

Those are process claims, and process claims are the ones a buyer can settle. Milliohm resolution is visible on the tester’s specification sheet. A 1-2 µm cross-section measurement error is visible in the lab’s calibration record and in how many coupons get cut per panel. The via-plus-trace method is a routing decision you can watch a technician make.

Contrast that with a capacity number. “600 employees” and “40,000 m² a month” cannot be checked in a two-day visit; they are asserted or they are not. This company asserts the first kind of fact and mostly declines the second — which is the opposite of how most small factories present themselves, and arguably more useful.

The number that holds up: 40,000 m² of building

The 2025 recruitment post gives a plant of more than 40,000 m² at 兴滨路8号 in the 中意 Ningbo Eco-Park, with three lines: high-end FPC, SiP/MEMS/DPC precision substrates, and components and modules.

A building area is a weak claim but a durable one. It is consistent with the 2012 relocation — you do not move into a 40,000 m² building and then describe yourself as a workshop — and it is consistent with a company running substrate-level processes, which need cleanrooms and plating lines rather than bench assembly.

It is also the only scale figure that appears on a page the company itself published. Everything larger comes from somewhere else.

The number that does not: 600 employees

A Zhejiang government postdoc-platform entry lists 600 employees and a design capacity of 40,000 m² a month in a 45,000 m² building. That page builds its table in JavaScript and rendered empty on re-check, so the figures could not be re-read.

The 2025 annual filing, as republished by a business database, shows 170 employees on social insurance. That database blocks non-China IPs.

Six hundred and 170 is not a rounding difference. It is the difference between a 600-person integrated manufacturer and a 170-person specialist. Both numbers may be arithmetically right for different populations — group headcount versus one legal entity’s insured staff — but nothing published reconciles them, and the 40,000 m²/month design capacity rides on the same unreadable page as the 600.

Use the plant area, the product lines and the test claims. Leave headcount out of the decision.

A certificate timeline kept by a university

The most complete compliance record for this company is hosted on a university employment site, not on any company page: ISO 9001 in October 2006, upgraded to the 2015 revision in October 2017; ISO 14001 in March 2016, upgraded the same month in 2017; ISO/TS 16949 passed in June 2016; UL and RoHS in June 2006; UL940-O in September 2008.

The dates are plausible and the 2017 upgrades are the right ones — a company that moved to the 2015 revisions on schedule is a company that was paying attention. But no certificate number, no certification body and no scope is given anywhere, and the TS 16949 entry stops in 2016.

That matters for automotive work. ISO/TS 16949 was replaced by IATF 16949, and certificates to the old standard expired in September 2018. A 2016 TS certificate with no transition evidence is not an IATF certificate. If a buyer needs PPAP, ask for the current IATF certificate and its scope — bare flex, or flex assembly.

Three product lines with no specification table

Fit first. Wakan suits FPC and rigid-flex programmes where test coverage and substrate handling matter more than a published spec table — work you would rather audit on the test floor than shortlist from a datasheet. It does not suit a buyer who has to compare suppliers on paper, because there is no paper.

FPC, SiP/MEMS/DPC substrates, and components and modules are three different businesses under one roof, and the combination is plausible for a company that calls itself a national-level specialised “little giant”. What is missing is the table: no layer count, no minimum line and space, no panel size, no copper weight, no coverlay tolerance.

For a flex supplier that is a real gap, because flex capability is mostly told in those numbers. A shop that can do 50 µm lines on 25 µm polyimide is a different supplier from one that does 100 µm. Nothing here separates them.

What is not established

No unified social credit code, no UL file number, no confirmed listing code and no layer ceiling. The 720379 code comes from a third-party database; the company’s own description of its equity status is a regional display on the Ningbo Equity Exchange growth board, which is not a stock exchange listing. Monthly capacity and the 45,000 m² building figure rest on a government page that would not render.

The name is a separate problem. The English brand WAKAN does not transliterate 华远, and “Huayuan” is one of the most common company names in Zhejiang. Check the Chinese characters on the business licence before wiring anything.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Plant area (company WeChat, 2025) 40,000 m² or more
Product lines (company WeChat) High-end FPC, SiP/MEMS/DPC substrates, components and modules
Years in operation (20th anniversary article, 2025) 20 years, i.e. founded 2005
Plant relocation (company article) Moved into the current plant in 2012
Electrical test resolution (Kelvin four-wire) mΩ level
Hole-wall copper thickness measurement error 1 to 2 µm, on blind and buried boards
Test throughput after automation (company article) up 300%

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
ISO 9001 Certified October 2006, upgraded to the 2015 revision in October 2017. No certificate number or body published; the timeline sits on a university careers page.
ISO 14001 Certified March 2016, moved to the 2015 revision October 2017 per the same timeline. No number, scope or expiry date.
ISO/TS 16949 Passed June 2016. No IATF 16949 certificate number, no transition evidence, and no scope statement saying whether it covers bare FPC or assembly.
UL / UL 940-O UL and RoHS listed for June 2006, and UL940-O for September 2008. Abbreviations only: no file number, no product category.

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.