Factory profile · Public sources reviewed

Sihui Fuji (FSQuality)

四会富仕电子科技股份有限公司 · Guangdong · Founded 2009 · SZSE ChiNext 300852, listed July 2020

Fuji prints its UL file number in text, including the heavy-copper ratings most suppliers leave undefined. Its layer ceiling is stated three ways.

Fuji is the strongest documentation case in this batch for heavy copper and high-frequency work: a UL file number in plain text and a stated 15 oz two-layer rating. The layer ceiling is the one number to pin down, because three versions exist.

Identity and record

Only entries that were checked against a source are shown. A blank field means we have not confirmed it, not that it does not exist.
Registered name (Chinese) 四会富仕电子科技股份有限公司
Registered name (English) Sihui Fuji Electronic Technology Co., Ltd.
Founded 2009
Listed SZSE ChiNext 300852, listed July 2020
Headquarters Guangdong
Production sites Sihui, Zhaoqing (six factory phases) · Thailand (Fuji Thailand)
Official website https://www.fsqualitypcb.com
Evidence levelPublic sources reviewed
Last reviewed2026-11-11
Registered entity and published production sites Registered entity Sihui Fuji (FSQuality) and 2 named production sites, from the disclosures cited on this page. PUBLISHED RECORD Sihui Fuji (FSQuality) 四会富仕电子科技股份有限公司 Founded 2009 · SZSE ChiNext 300852, listed July 2020 Sihui, Zhaoqing six factory phas… Thailand Fuji Thailand Source: disclosures cited on this page
Entity and footprint map. Sihui Fuji (FSQuality) and the production sites named in the disclosures cited above.

A UL file number you can read

Almost every factory in this directory says it holds UL certification. Fuji prints the file number: E336308. It goes further and states the heavy-copper recognition that goes with it, 15 oz on a two-layer board and 13 oz on a multilayer board.

That combination is rare and it is valuable. Heavy copper is where UL listings usually get vague, because the construction has to be recognised at the copper weight you are actually buying. A supplier that publishes both the file number and the copper rating has either done the work or is confident enough to be checked. Either way, a compliance engineer can verify it in UL Product iQ in ten minutes.

Three answers to the layer question

The homepage and the English site say 2 to 100 layers. The four-advantages page says up to 80 layers. The high-multilayer product page shows reference builds at 100, 80 and 58 layers, all of them ATE tester boards.

The most likely reading is that 100 layers is achievable on a test-board construction, 80 layers is the routine ceiling, and the product page examples are the proof points. A buyer should not assume 100 layers on a production order without asking, and an ATE board is the specific application where the number has meaning.

Six factories on one site

The Sihui site is organised as six factory phases with more than 500 sets of production and inspection equipment and over 1,900 employees, 70% of them local. Capacity is published as 210,000+ m² for China and 100,000+ m² for Thailand, without a period attached, so monthly against annual cannot be determined.

The sample retention policy is the detail worth noticing: ten years for standard product and fifteen for automotive, with a cross-section shipped with each lot. That is an automotive-tier practice, and it tells you more about how the factory thinks than any capacity figure.

The Japanese customer base is the tell

The company states that 64% of its cooperating customers are Japanese, and that it ranked first among 35 domestic PCB companies on that measure in 2021. Japanese customers on heavy-copper and high-frequency work have a reputation for tight acceptance criteria and long qualification cycles.

If that share is accurate, the factory has been through more demanding acceptance processes than its size would suggest. It also means the sales organisation is used to specification-driven buyers rather than price-driven ones, which is usually good for a European or American customer with a detailed drawing package.

High frequency and heavy copper in one plant

The frequency range of 1 GHz to 40 GHz with 50/50 µm lines and ±5% impedance tolerance sits alongside a 3–15 oz copper range. Those are two different customer sets sharing a factory: RF and antenna work on one side, power and thermal boards on the other.

Ask which line will run your board. A 40 GHz stack and a 15 oz power board have almost nothing in common in process terms, and a factory that does both is likely to have separate engineering groups for them.

How to use this profile

Shortlist Fuji for a heavy-copper power board, an ATE test board, or an RF board that needs a UL-recognised construction. Start with the UL question, because this is the rare case where the answer is already public.

Ask three things: the layer ceiling for a production order rather than a reference build; the period attached to the 210,000 m² capacity figure; and which site holds the IATF and EN 9100 certificates, since the list does not say whether Sihui and Thailand are covered separately.

What is not established

Minimum mechanical drill, minimum laser via and maximum panel size are not published. Copper weight per layer is not given; the 3–15 oz range is a product range rather than a process window. The surface-finish list is only partly stated. Certificate numbers other than the UL file are omitted, and per-site scope for Sihui against Thailand is not disclosed.

Published limits

Every value below is quoted as published by the company or a public record.

ParameterValue as published
Layer count, homepage claim 2 to 100 layers
Min line width and space, high-frequency structures 50/50 µm
Supported frequency range 1 GHz to 40 GHz
Impedance control tolerance ±5%
Thick copper range 3 oz to 15 oz
UL-recognised heavy-copper rating 15 oz on 2-layer, 13 oz on multilayer
Capacity, China plant 210,000+ m², period not stated
Capacity, Thailand plant 100,000+ m², period not stated
Ultra-high-layer reference builds 100-layer and 80-layer ATE tester boards; 58-layer test equipment board
Sample retention policy 10 years standard product, 15 years automotive product, with a cross-section per lot

Certifications on record

A certificate covers a legal entity and a site, not a brand. Scope and expiry are recorded where published.

StandardWhat the record shows
UL, file E336308 File number printed in text, with heavy-copper recognition stated: 15 oz on 2-layer, 13 oz on multilayer
IATF 16949:2016 Listed with version year; no number or issuing body
EN 9100:2018 The European equivalent of AS9100, listed with version year
ISO 13485:2016 Listed with version year
ISO 9001 and ISO 14001 Listed with version years
IECQ QC 080000 Listed with version year on the same page; no certificate number
ISO 45001 Listed with version year; no certificate number or issuing body
ISO 27001 and ISO 14064 Both listed with version years; no numbers published

Ask this factory for a quote

Send one technical package and compare the replies. The RFQ checklist lists what to include; the quote specifications say which parameters change the price for the process you are buying.

Request a quote

Source and review conventions are described in how we verify. Corrections can be sent through the contact channel.