Multi-level BOM: the quantity that changes four times
Which of the quantities a multi-level BOM rolls up are actually set inside the design tool, and which of them does a factory decide only after the quote is signed?
The switching signals in this article
- 01 Four numbers, one part Twelve per board, 1,098 per thousand finished units, ten per array, ten thousand per reel. The tree holds the first two, and only one of those is a number a plant would recognise.
- 02 One yield figure in 1,252 lines The only published yield number in the directory is a case study about copper thickness at one Kinwong plant. Every other roll-up a buyer performs is a design number wearing a manufacturing label.
- 03 Fourteen panels, no counts Fourteen profiles publish a panel dimension, twelve phrase it as a maximum, one uses the word array, none states boards per panel. A ceiling is not a quantity.
- 04 Zero mentions of reflow A sub-assembly is reflowed at its own level and again at the parent's. Not one of 1,252 capability lines describes a reflow, a bake or a solder paste, so the pass count has no published counterpart.
The outline on multi-level BOM software is a competent piece of work. It defines the indented BOM, splits the engineering BOM from the manufacturing one, lists the five roles that touch each, and then ranks six ways of holding the tree: a spreadsheet, an independent cloud tool, an API engine, a PLM system, an ERP module, a CAD-integrated tool. It quotes an average re-spin at $46,000, a claim that 80% of designs need at least one part replacement, and a survey line putting spreadsheets at half of all organisations. None of the three figures carries a source in the text.
Six options, one assumption. Every one of them is a way of holding the tree inside a single company. The tree crosses the company boundary as a purchase order, and a purchase order has exactly one level: part number, quantity, price, date. What happens to the hierarchy at that line is not a software question, which is why no tool comparison asks it.
Follow a quantity instead of a data model and the gap becomes countable. One part carries four different numbers between a schematic and a shipping carton. They are set by four people in three buildings, and across the 1,252 capability lines published by the 131 factories in this directory, two of the four appear at all: one yield figure, and two statements about minimums.
Four numbers, one part
| The number | Set by | What fixes it | Profiles that publish it |
|---|---|---|---|
| Demand per unit | Design engineer | The schematic: twelve places for one resistor on one board | 0 of 131 |
| Build quantity | Planner | First-pass yield at every level between the part and the carton | 1 of 131 |
| Array quantity | CAM engineer | Board outline fitted to a panel, with rails, gaps and rotation | 14 give a ceiling, 0 a count |
| Purchase quantity | Buyer | Package multiple, minimum order, distributor stock | 2 of 131 |
A BOM tool holds the first two exactly, and that is worth having: the roll-up is arithmetic on a tree, and arithmetic is what software does well. Twelve resistors, two boards to a sub-assembly, four sub-assemblies to a carton is ninety-six, and a tool that says ninety-six has already prevented the error of ordering twelve.
The third and fourth are decided later, in places the tool does not reach. The array count is produced by a CAM engineer fitting an outline to a panel after the order lands. The purchase quantity is produced by whichever package the distributor stocks that week. A buyer usually meets both as line items on an order confirmation, or does not meet them at all.
First number: what the schematic asks for
The tree has a shape, and the shape is the point. A sub-assembly that appears four times in a carton is four physical objects, each with its own test, its own storage and its own failure modes. Losing that structure is how a fault turns into a teardown of the whole product, which is the argument the outline makes, and it is right.
What the record holds is one level of it. Of 1,252 capability lines across 131 profiles, the count containing “BOM” is zero. The count containing sub-assembly, semi-finished or work in progress is also zero. The only structure the tables describe is the board: layers, dimensions, copper weight, finish, tolerance. Everything above the board has no line because it has no geometry to measure.
The services field says something different, and the difference is the useful part. Forty-six profiles list SMT among their services, 21 list turnkey, and ten list EMS or box build, which is an offer to assemble assemblies. So the declared capability reaches at least three levels while the published specification stops at one. A box-build plant consumes a multi-level BOM every week and has never described one on a page.
Second number: what the planner builds
Yield is where the tree stops being arithmetic and becomes a forecast. Every level above a part consumes units of that part at a rate worse than one to one, so the quantity to start is the quantity to ship divided by the product of the yields at every level in between. At 1,000 shipped units the three cases look like this.
There is exactly one yield figure in the whole directory. It sits in a capability line at Jiangxi Kinwong Precision Circuit, drawn from a government case study: copper thickness error cut to within three micrometres, yield raised from 90 to about 93%. It is a statement about a process improvement at one plant, not a figure for an order, and it is the only number of its kind a buyer will find here.
| Levels above the part | Yield stack | Units to start |
|---|---|---|
| Board only | 98% at final assembly | 1,021 |
| Board into sub-assembly | 93% then 98% | 1,098 |
| Board into sub-assembly into box | 95%, 93%, then 98% | 1,155 |
The second row uses the only published yield in the directory as its first term, and a 98% final assembly as an assumption, which is flagged as an assumption because no profile states one.
Run the resistors through it. For 1,000 finished units the tree prints 12,000 pieces. The two-level stack needs 1,098 sub-assemblies, so it needs 13,176 pieces, which is 1,176 more on a single line item. Over two hundred line items that is the entire material variance a buyer and a plant will later argue about, and it was decided before the first part was bought.
The error is one-sided in a way worth naming. Yield cannot exceed 100%, so the design number is always the optimistic one, and it is optimistic in proportion to how many levels sit above the part. A deeper tree is often described as more precise, because more care went into building it. For quantities it is the reverse.
Third number: what the panel holds
The panel is the unit the fabricator actually cuts, plates and drills, and its size is the number a buyer is most likely to have seen without noticing. Fourteen profiles publish a panel dimension. Twelve phrase it as a maximum, and only one of those uses the word array: Founder PCB in Zhuhai gives 487 × 306 mm for a 30-layer server board. None of the fourteen states how many boards fit, which is the number the panel is being asked for.
Jinhong Electronics in Ji’an shows why the word “panel” needs care before the count can even be asked for. One capability line gives three rectangles: maximum 580 × 550 mm, working panel 400 × 500 mm, and customer designs usually within 560 × 530 mm. The working panel is 63% of the ceiling. A count computed against the ceiling and a count computed against the working panel are two different answers to what sounds like one question.
Take the array ceiling at Founder and a 120 × 90 mm board, with a 5 mm rail all round and a 3 mm gap between boards. The usable area is 477 × 296 mm.
| Cutting | Boards per array | Arrays for 1,000 boards |
|---|---|---|
| As drawn, 3 across by 3 down | 9 | 112 |
| Rotated, 5 across by 2 down | 10 | 100 |
The same BOM, the same board, and a 12% difference in the laminate consumed, because 112 arrays cover 16.7 m² of panel against 14.9 m² for 100. Area utilisation moves from 65.2% to 72.5% on the rotation alone, before anyone considers whether the rails can be narrower on two sides.
There is a second ceiling, and it belongs to a different machine. Putian Technology publishes its PCBA assembly limits as a standard pallet of 500 × 450 mm and a maximum of 1,480 × 450 mm. That rectangle is not the fabrication panel, so a panel that is efficient for plating may have to be split for the line, and the split happens after the panelization that was quoted.
Fourth number: what the reel sells
Two of the 131 profiles publish anything about minimums. Jinhong Electronics states that it has no minimum order quantity, the only outright no in the directory. JLC states an entry quantity of five pieces. Neither names a package, and no capability line anywhere in the 1,252 mentions a reel, a tray, a tape or kitting.
Packaging is where the demand number and the purchase number part company. Take a hundred boards with twelve of one resistor on each: 1,200 pieces of demand. A 0402 reel commonly holds 10,000, so one reel is 8.3 times the need, and the remaining 8,800 pieces become stock that no BOM line records. A cut tape, sold by the piece, is a third option with no reel-level lot behind it, which changes the traceability story and not only the price.
The same part number in three packages is three multiples, three prices and three lots. The tree has one line for it, and the line does not say which one the quote assumed.
Depth is paid for in thermal passes
A sub-assembly is reflowed at its own level, then reflowed again when it is placed into its parent. Every part on that sub-assembly sees both passes, and the second one is not a repeat of the first: it is a second excursion through a profile the part was qualified for once.
The record says nothing about it. Of 1,252 capability lines, the number containing “reflow” is zero, the number containing “bake” or “desiccant” is zero, and the number containing “solder paste” is zero. Four lines use the word solder and all four are about something else: a solder ball pitch at Fastprint, a solder mask bridge at Kehaoda and at Sanlicheng, and a solderability test at Viafull.
This is the field the outline assigns to manufacturing, correctly. Sequence is what determines the pass count, and a tool can store a sequence. What the tool cannot do is confirm that the plant ran it, because the plant’s published record contains no process step at all. Moisture sensitivity makes the cost concrete: floor life is a budget of hours at a given temperature, and a second pass spends part of that budget again on parts that already spent it once. The failure appears at final test on the parent, where it is attributed to the parent.
Configuration has the same shape, one level up. No capability line in the directory uses the words variant, configuration or DNP. The nearest thing is a Delton product page that lists four constructions and calls them “optional on this board family”. A variant means one MPN carrying two quantities depending on which configuration the order is for, while the purchase order carries one number and the plant builds what that number says.
Five lines that replace the tree
None of the four numbers can be fixed by choosing a better tool, and all of them can be fixed by asking, per order, in writing. These are the five questions that convert a tree into a build:
- Boards per array, and who set it. Ask for the count, not the ceiling. Fourteen profiles publish a panel dimension, none publishes a count, and the rotation alone moved the example above by 12%. Asked of the CAM engineer, at the fabricator.
- First-pass yield per level, as quoted. Not a target and not a historical average. One profile in 131 publishes a yield figure at all, and it is a case study about copper thickness. Asked of the planner, before the price is fixed.
- Package and multiple for each MPN, and the lot behind it. A full reel, a tray and a cut tape are three decisions. Two profiles state a minimum, none states a package. Answered by the buyer, with the distributor’s part number in the reply.
- Which MPNs are not populated in which configuration. Name the register rather than the rule. No profile in the directory uses the vocabulary, so the buyer is the only party who can define it. Answered by whoever owns the variant list.
- Reflow passes per level. Count them. A two-level assembly is two passes for everything on the sub-assembly, and nothing in 1,252 published lines confirms or denies it. Asked of the process engineer, and worth asking before the sub-assembly is designed rather than after.
What the tool can and cannot promise
The CAD-integrated option in the outline deserves the ranking it gets, for one reason that is not about integration: it cannot go stale between saves. A spreadsheet can be accurate for an afternoon. That is a real gain and it is a gain in intent, which is where the tree starts.
The quantity a buyer signs for is a manufacturing quantity, and three of its four inputs are set outside any tool. The conversion between the two is a document, not a schema: five lines on an RFQ, answered by name, per order. A tool that holds the tree perfectly still hands the buyer a number that is 9.8% low on a two-level assembly, and it will not be flagged as an error because nothing in the tree is wrong.
The tree is a design object and the order is a manufacturing object. Both are worth keeping. The work that gets forgotten is the conversion between them, and it belongs to the buyer for the same reason the part number leaves the component library with one identity and arrives with another, and the same reason the revision on the board needs a document behind it. This directory can say which plants offer assembly, because that is a service flag. It cannot say how they run it, because no profile has published a process step. That part gets asked for, one order at a time.
Source: 1,252 capability lines and the service fields of the 131 profiles in this directory, read 2026-11-17. Panel rail and gap allowances, the 98% final-assembly yield and the 10,000-piece reel in the worked examples are packaging and process conventions, not profile figures. The 90 to 93% figure is Kinwong Ji’an’s own case study.
Questions this article answers
Does a multi-level BOM change what a factory quotes for the boards?
Not much, and not in the way the tree suggests. A fabrication quote is built from board area, layer count, material, finish and quantity, so it responds to the board and the order size rather than to the hierarchy above them. Where the tree does change the price is on the assembly side, through the number of placements and the number of passes, and neither of those appears in the quote as a line.
Is a phantom assembly still phantom once it reaches a contract manufacturer?
No. In the design tool a phantom is a sub-assembly with no stock item, so it exists only as a roll-up rule. At the plant the same thing becomes a physical semi-finished item that is built, tested, counted and stored before it is consumed by the next level, and it needs a traveller of its own. None of the 1,252 capability lines published by the 131 profiles in this directory describes a sub-assembly, a semi-finished item or work in progress.
Who decides how many boards go on a panel, and can a buyer see that number?
A CAM engineer at the fabricator decides it, after the order is placed, by fitting the board outline to a panel with rails and gaps and choosing a rotation. Fourteen profiles here publish a panel dimension and twelve of those are stated as a maximum, which is the ceiling the fit is made inside rather than the count that comes out of it. Ask for boards per array in writing, because the count moves the laminate consumed by more than a tenth.
Why would a two-level assembly need more components than the roll-up says?
Because the roll-up is exact arithmetic on a tree and the plant works on a yield stack. At 93% first-pass yield on the sub-assembly and 98% at final assembly, 1,000 shipped units need about 1,098 sub-assemblies, and every component below that level scales with the 1,098. The gap is one-sided, since yield cannot exceed 100%, and it grows with each level added above the part.
Can a buyer simply order the exact quantity the BOM calls for?
Rarely, because the purchase quantity is defined by the package rather than by the need. Two of the 131 profiles publish a minimum at all: one states that it has none, the other an entry quantity of five pieces, and neither names a package. A full reel, a tray and a cut tape of the same part are three different multiples, three prices and three levels of lot traceability, and the BOM line does not say which one the quote assumed.